Hall Measurement System with Instec HCP621G-PMH Temperature Controlled Stage

Location 

B04 McCourtney

Capabilities

• Four probes connected to the SMU200
• Temperature Range -160℃ to 600℃
• Hall Effect system
  • Magnetic Flux Density: 0.55 Tesla
  • Magnet Stability: <2% over 1 year
  • Uniformity: +/-1% across measurement area
  • Hall Voltage: 1μV to 12V
  • Source Current: 1nA to 20mA 
  • Resistivity: 10^-5 to 10⁷ Ohm-cm 
  • Mobility: 1 ~ 10⁷ cm²/Vs (at room temperature)
  • Carrier Concentrations: 10⁷ ~ 10²¹
  • Pole Gap: 27mm

Typical Use

• Measurement and characterization of novel conductive materials/sensors in varying gas, and temperature conditions
• Hall effect measurements
• HCP621G-PMH Micro control stage can also be used on a microscope for other sample work

Internal Daily Rates

• Unassisted: $45
• Assisted: N/A

External Daily Rates 

• Unassisted: $117
• Assisted: N/A

Instrument Availability

VIEW CALENDAR

An iLab account is required to view the availability calendar. For instructions on creating an account, click here.